Materiales Artesanales : Stone & Terracota

Manufacturing work wall fountain in ivory marble honed finish, from drawing and details of measures provided by the customer. Details provided: From these details we started with the manufacturing process: Up to finish making the source: Finally we want to show a comparison between the provided design and made source, where you can see some differences in proportions, encouraged by the measures provided in the reference model are not in proportion to the drawing provided. www.artesaniadelmarmol.es

Manufacturing work wall fountain in ivory marble honed finish, from drawing and details of measures provided by the customer. Details provided: From these details we started with the manufacturing process: Up to finish making the source: Finally we want to show a comparison between the provided design and made source, where you can see some differences in proportions, encouraged by the measures provided in the reference model are not in proportion to the drawing provided. www.artesaniadelmarmol.es

Manufacturing work wall fountain in ivory marble honed finish, from drawing and details of measures provided by the customer. Details provided: From these details we started with the manufacturing process: Up to finish making the source: Finally we want to show a comparison between the provided design and made source, where you can see some differences in proportions, encouraged by the measures provided in the reference model are not in proportion to the drawing provided. www.artesaniadelmarmol.es

Work done to recover a terracotta floor inside house in very bad condition due to years of applications artisan treatments such as oil mora, which have been obscured the mud and by the erosion of time, presented a state that can be seen in the following photos: We proceeded to the pickling process for the removal of old and shabby treatment. Having multiple layers applied over the years had to go by making several passes and pickling layer by layer. However in these cases there are areas as embedded inside the mud that are almost impossible to remove; however this was the result obtained after stripping and cleaning phase: Finally as the house was old and had moisture seepage problems we proceeded to the application of treatment for outdoor terracotta floors with wet finish effect. This type of treatment allows the slab traspirar so that moisture evaporates from within the mud of possible leaking. However treatment abroad, to allow traspirar the mud, lea...

Normally all the fabrications of our marble sinks begin from an order from a customer that specifies us the measurements, type of marble you want and the type of finish as polished, honed, ... All sinks are manufactured measures and fully personalized way, so that apart from those discussed above details, the customer choose from our catalog the sink design or give us your own based from drawings design or a photo . From this point you can start with the manufacturing process. The process usually begins with the acquisition of the selected material quarry to submit it to the factory for manufacturing. This quarry election process is extremely important because it determines the quality of the material. This is where the view and experience enters know when select the best bowling quarry, to offer a first material to our customers. Once the material factory can start with the manufacturing process starting from the material as cutting, emptying and finally to the passage by ...

Work done in terracotta floor outdoor terraces Private apartments Jacaranda 1 in Marbella. This time we had to proceed to the recovery of clay soils in poor condition in some apartments urbanization, which mainly showed accumulation of mildew and mold areas. For this work we had to proceed to remove mold and mildew areas and then apply protective treatment, finished both wet effect (which intensifies the natural color of mud), and matte finish; depending on the preferences chosen by each of the owners of the different apartments. Here you have some pictures of work done: INITIAL STATE FINAL RESULT

Polishing is achieved by abrasion, passing marble floor by different increasingly fine particle sizes, which give the stone that aspect of "brilliant". Today is mainly used diamond abrasive, which shortens time and get spectacular results, while minimizing the forces working for people and machines with the consequent benefit. With a smooth, polished shiny surface with almost zero porosity, highlighting the maximum level the structure, color and texture of the stone is achieved. This finish to be "closed pores", provides improved resistance to stone attack external agents, which can increase resistance to various treatments protection. Significantly, the pores of the stone is never be closed, although with polished it comes to minimize to the maximum. It applies mainly in marble and granite, as they are very compact and with a high degree of crystallinity rocks. With respect to their use for soils should be highlighted: It's the kind of classic finish a...