Posts

Showing posts from September, 2018

EXTERIORS OF HOUSING IN 3D

Image
In this article we are going to show you some examples of exterior designs of single-family houses in 3D.

These 3d design will allow you to see the different perspectives of the house and even of the landscaping project with great detail.

All these examples of 3D designs have been developed following the client's instructions and based on the project's memory; through a continuous feedback to adapt the 3D designs to your preferences.

Here are some examples of work done :


















FOUNTAIN IN POLISHED MARBLE BLACK MARBLE

Image
From the details provided by the client we proceeded to the manufacture of a low fountain at ground level in Marquina black marble and polished finish.

The measurements of the marble fountain were:

Diameter of the plate: 80 cm
Total height including small base: 20 cm

Just at the base of the fountain, a hole was made in the same piece that was hidden with a cover of the same marble, where the engine went to complete a closed water circuit.

Here we leave several photos of the entire manufacturing process :














TERRACOTTA INTERIOR FLOOR IN VERA (ALMERIA)

Image
In this work we had to proceed to the recovery of an interior terracotta floor in a detached house on a farm located in Vera (Almería).

The soil that had been treated for a long time had the typical deteriorations due to the passage of time such as scratches, dull coloring and areas where the degree of waterproofing had been lost or began to do so.

Here are some pictures of how we found theterracotta floor :







The procedure to be followed was first to strip to remove any remaining old treatment, open the pore and clean stains that were embedded. Afterwards, rinse cleaning was carried out to eliminate remnants of saltpeter and leave the soil ready to dry in order to proceed with the treatment phase.

State after pickling and cleaning phase :