CUSTOM MANUFACTURING WALL FOUNTAIN

From a sketch, we proceeded to manufacture a completely custom-made limestone wall fountain.

The fountain was composed of a simple pilon with some details of molding and the front of the fountain was with two small columns on the sides and a carving detail in the shape of a flower just where the tap of the fountain would go.

A hidden motor was also added so that the source had a closed water circuit system.

Here you have pictures of the entire manufacturing process:

















Location: Madrid, España

Comments

Post a Comment

Popular posts from this blog

Vivienda unifamiliar en Lomas de San Anton (Málaga)

Image
En este proyecto participamos desde un primer momento desde los orígenes sobre los planos de la vivienda. Tuvimos una labor principal asesorando directamente al cliente sobre los diferentes materiales a utilizar en su vivienda, adaptándonos en todo momento a sus gustos, preferencias y presupuesto. La vivienda es un unifamiliar independiente con una parcela de unos 600 m2 y con una superficie construida de unos 300 m2, compuesta por : Sótano, con bodega y salón recreativo Planta baja donde se ubica la cocina, salón principal, un baño común y un dormitorio con baño propio; además cuenta con un porche cubierto que bordea la piscina y patio trasero. Planta alta, donde se ubican el dormitorio principal con cuarto de baño propio con sauna y otros dos dormitorios que comparten un baño común. Resumen de materiales y servicios suministrados : Suelo de barro artesanal tonalidad rojiza Suelo de barro antiguo Suelo de piedra natural Aplacados de mármol y mosaicos Servicio de ...
Read more

TERRACOTTA FLOOR RECOVERY OF EXTERIOR WITH LINAZA OIL TREATMENT

Image
In this work we had to proceed with the elimination of previous treatments . In this case he had been repeatedly given hands of flaxseed oil, which had made every time the floor that is a clear tone was getting darker and darker with the appearance of dirt. The client had tried on his own to lift this flaxseed oil treatment using pickling products that he had purchased on his own and using first pressurized water machine and then sanding by hand, but without much success. It is at this moment when he decided to call us and get in our hands. Here we leave some photos of the initial state of the terracotta floor as we found it : From this moment on, the first step was to proceed with the treatment of old flaxseed oil, which cost, but based on repeating the process up to three times in many areas, we achieved optimal results. From here, we waited a few days for the terracotta floor to be completely dry and we proceeded to appl...
Read more

Cleaning and treatment of soil composition inside checkerboard marble and terracotta

Image
In this work we have the added difficulty of a floor inside checkerboard composed of aged cream marble and semi-manual terracotta floor . We speak of added difficulty; as the combination of marble and mud is not very common and it is often problematic, since the cleaning products used for mud have an acid component brightness eats polished marble. Fortunately this marble floor was old and honed (dull), so this facilitated the work; although we had a special care when using cleaning products in right proportions to avoid damaging the marble at all. The floor had stains embedded especially in the mud of semi-manual. Therefore the procedure was to make a first cleaning phase , as we said with proportions of very poor cleaning products to protect the marble. This process had to be repeated twice in a row to achieve the total elimination of stains. Subsequently after waiting for the soil completely dried about 4 days we proceeded to the implementation of protective treatment that w...
Read more